 |
Husqvarna Viking Shell Rolled Hem Foot 2mm (Cat 5)
Information for Husqvarna Viking Shell Rolled Hem Foot 2mm (Cat 5)
Husqvarna Viking Shell Rolled Hem Foot 2mm (Cat 5).
Additional information
1. Snap on 2 mm Shell Rolled Hem Foot.
2. Press a rolled hem (the width of the tunnel on the underside of the foot) in the first inch of the hem.
3. Place the hem under the presser foot and stitch several stitches along the edge of the hem.
4. Stop with the needle in the fabric, raise the presser foot and pull the fabric edge up into the scroll/guide on the foot.
5. Lower the presser foot, continue to sew. Do not help the fabric edge to roll, simply hold it vertically.
Stitch a shell rolled hem on lightweight fabrics for lingerie, chiffon, scarves. Zigzag stitch, length 4.5, width 4 (increase upper tension slightly so the edge will scallop)
Not Suitable for the Emerald Series.
Writing guidelines
